Usage ===== We will explain here the basic usage of py_neuromodulation. Check out the :doc:`examples ` for directly following along. In general only a time series is required with a specified sampling frequency. Here is the definition of a minimalistic example: .. code-block:: python import py_neuromodulation as nm import numpy as np NUM_CHANNELS = 5 NUM_DATA = 10000 sfreq = 1000 # Hz sampling_rate_features_hz = 3 # Hz data = np.random.random([NUM_CHANNELS, NUM_DATA]) stream = nm.Stream(sfreq=sfreq, data=data, sampling_rate_features_hz=sampling_rate_features_hz) features = stream.run() `features` will be a pd.DataFrame containing the computed features for each channel and each time point. In this example the default signal processing pipeline is estimated. An offline data-stream was initialized with raw data being common-average re-referenced. FFT, bursting features and temporal waveform-shape were computed. Features were calculated with a *sampling_rate_features_hz* of 3 Hz and subsequently *z-score* normalized. We can however further define channel-specific parametrization such as re-referencing, channel selection, target definition, and also select and define additional features. Check out the example :doc:`auto_examples/plot_0_first_demo` for a first introduction. The following sections discuss additional parametrization. In a nutshell, the **settings** dictionary and a **channels** dataframe are used for parametrization. The above example implicitly used the default settings and channels. However, we can also define directly specific settings and channels: .. code-block:: python from py_neuromodulation import nm_define_nmchannels, NMSettings channels = nm_define_nmchannels.get_default_channels_from_data(data, car_rereferencing=True) settings = NMSettings.get_fast_compute() Channel parametrization ----------------------- The channel parametrization is defined in a :class:`~pandas.DataFrame`. The following columns are required: +-----------------------------------+----------------------------------------+ | Column name | Description | +===================================+========================================+ | **name** (string) | name of the channel | +-----------------------------------+----------------------------------------+ | **rereference** (string) | different channel name for | | | bipolar rereferencing, or | | | *average* for common average | | | re-referencing | +-----------------------------------+----------------------------------------+ | **used** (int) | 0 or 1, channel selection | +-----------------------------------+----------------------------------------+ | **target** (int) | 0 or 1, for some decoding | | | applications we can define target | | | chanenls, e.g. EMG channels. | | | Target channels are not used for | | | feature computation. | +-----------------------------------+----------------------------------------+ | **type** (string) | `mne-python`_ supported channel types | | | e.g. ecog, eeg, ecg, emg, dbs, | | | seeg etc. | +-----------------------------------+----------------------------------------+ | **status** (string) | *good* or *bad*, used for channel | | | quality indication | +-----------------------------------+----------------------------------------+ | **new_name** (string) | this keyword can be specified to | | | indicate the used | | | re-referncing scheme | +-----------------------------------+----------------------------------------+ .. _mne-python: https://mne.tools/stable/glossary.html#term-data-channels **rereferencing** constitutes an important aspect of electrophysiological signal processing. Most commonly bipolar and common average re-referencing are applied for separate channel modalities. The following possible parametrization option are available: .. list-table:: :header-rows: 1 * - Rereference Type - Description - Example * - average - common average rereference (across a channel type, e.g. ecog or eeg) - *average* * - bipolar - bipolar rereferencing, specified by the channel name to rereference to - *LFP_RIGHT_0* * - *combination* - combination of different channels separated by "&" - *LFP_RIGHT_0&LFP_RIGHT_1* * - none - no rereferencing being used for the particular channel - *none* The **channels** can either be created as a *.tsv* file, or as a pandas DataFrame. There are some helper functions that let you create the channels without much effort: .. code-block:: python channels = nm_define_nmchannels.get_default_channels_from_data(data, car_rereferencing=True) When setting up the :class:`~nm_stream_abc`, `nm_settings` and `channels` can also be defined and passed to the init function: .. code-block:: python import py_neuromodulation as nm stream = nm.Stream( sfreq=sfreq, channels=channels, settings=settings, ) Setting definition ------------------ The *nm_settings* allow for parametrization of all features. Default settings are passed from the `nm_settings.yaml` file: .. toggle:: .. literalinclude:: ../../py_neuromodulation/default_settings.yaml :language: yaml Preprocessing ^^^^^^^^^^^^^ The following preprocessing options can be written in the *preprocessing* field, **which will be executed in the specified order**\ : .. code-block:: json "documentation_preprocessing_options": [ "raw_resampling", "notch_filter", "re_referencing", "raw_normalization" ], Resampling ~~~~~~~~~~ **raw_resampling** defines a resampling rate to which the original data is downsampled to. This can be of advantage, since high sampling frequencies automatically require usually more computational cost. In the method specific settings the resampling frequency can be defined: .. code-block:: json "raw_resampling_settings": { "resample_freq_hz": 1000 } Notch Filtering ~~~~~~~~~~~~~~~ **notch_filer** can be enabled with the *line_noise* frequency supplied as a init parameter to :class:`~nm_stream_abc`. Normalization ~~~~~~~~~~~~~ **normalization** allows for normalizing the past *normalization_time* in seconds according to the following options: * mean * median * zscore * zscore-median * quantile * power * robust * minmax The latter four options are obtained via wrappers around the `scikit-learn preprocessing `_ modules. *zscore-median* is implemented using the following equation: :math:`X_{norm} = \frac{X - median(X)}{median(X)}` The *normalization_time* allows to specify a **past** time window that will be used for normalization. The setting specification for *raw* and *feature* normalization is specified in the same manner: .. code-block:: json "raw_normalization_settings": { "normalization_time": 10, "normalization_method": "median" } Features ^^^^^^^^ Features can be enabled and disabled using the *features* key: .. code-block:: json "features": { "fft": true, "stft": true, "bandpass_filter": true, "sharpwave_analysis": true, "raw_hjorth": true, "return_raw": true, "coherence": true, "fooof": true, "bursts": true, "linelength": true, "nolds": true, "mne_connectivity": true } Oscillatory features ~~~~~~~~~~~~~~~~~~~~ Frequency band specification """""""""""""""""""""""""""" Frequency bands are specified in the settings within a dictionary of frequency band names and a list of lower and upper band ranges. The supplied frequency ranges can be utilized by different feature modalities, e.g. fft, coherence, sharpwave etc. .. code-block:: json "frequency_ranges_hz": { "theta": [ 4, 8 ], "alpha": [ 8, 12 ], FFT and STFT """""""""""" Fast Fourier Transform and Short-Time Fourier Transform are both specified using the same settings parametrization: .. code-block:: json "fft_settings": { "windowlength_ms": 1000, "log_transform": true, "kalman_filter": false } *log_transform* is here a recommended setting. Kalman filtering """""""""""""""" **kalman_filter** can be enabled for all oscillatory features and is motivated by filtering estimated band power features using the white noise acceleration model (see `"Improved detection of Parkinsonian resting tremor with feature engineering and Kalman filtering" `_ Yao et al 19). The white noise acceleration model get's specified by the :math:`T_p` prediction interval (Hz), and the process noise is then defined by :math:`\sigma_w` and :math:`\sigma_v`: .. math:: Q = \begin{bmatrix} \sigma_w^2 \frac{T_p^{3}}{3} & \sigma_w^2 \frac{T_p^2}{2}\\ \sigma_w^2 \frac{T_p^2}{3} & \sigma_w^2T_p\ \end{bmatrix} The settings can be specified as follows: .. code-block:: json "kalman_filter_settings": { "Tp": 0.1, "sigma_w": 0.7, "sigma_v": 1, "frequency_bands": [ "low gamma", "high gamma", "all gamma" ] } Individual frequency bands (specified in the *frequency_ranges_hz*\ ) can be selected for Kalman Filtering (see `Chisci et al 2010 `_ for an example). Bandpass filter """"""""""""""" **bandpass_filter** enables band power feature estimation through precomputation of a FIR filter using the `mne.filter.create_filter `_ function. .. code-block:: json "bandpass_filter_settings": { "segment_lengths_ms": { "theta": 1000, "alpha": 500, "low beta": 333, "high beta": 333, "low gamma": 100, "high gamma": 100, "HFA": 100 }, "bandpower_features": { "activity": true, "mobility": false, "complexity": false }, "log_transform": true, "kalman_filter": false } The *segment_length_ms* parameter defines a time range in which FIR filtered data is used for feature estimation. In this example for the theta frequency band the previous 1000 ms are used to estimate features based on the FIR filtered signal. This might be beneficial when using shorter frequency bands, e.g. gamma, where estimating band power in a range of e.g. 100 ms might result in a temporal more specific feature calculation. A common way to estimate band power is to take the variance of FIR filtered data. This is equivalent to the activity `Hjorth `_ parameter. The Hjorth parameters *activity*\ , *mobility* and *complexity* can be computed on bandpass filtered data as well. For estimating all Hjorth parameters of the raw unfiltered signal, **raw_hjorth** can be enabled. Analyzing temporal waveform shape """"""""""""""""""""""""""""""""" **sharpwave_analysis** allows for calculation of temporal waveform features. See `"Brain Oscillations and the Importance of Waveform Shape" `_ Cole et al 17 for a great motivation to use these features. Here, sharpwave features are estimated using a prior bandpass filter between the *filter_low_cutoff* and *filter_high_cutoff* ranges. The sharpwave peak and trough features can be calculated, defined by the *estimate* key. According to a current data batch one or more temporal waveform events can be detected. The subsequent feature is returned as the *mean, median, maximum, minimum* or *variance* of all events in the feature computation batch, defined by the *estimator*. For further introduction see the example notebook :doc:`auto_examples/plot_3_example_sharpwave_analysis`. Here the full parametrization in the *nm_settings*: .. toggle:: .. code-block:: json "sharpwave_analysis_settings": { "sharpwave_features": { "peak_left": false, "peak_right": false, "trough": false, "width": false, "prominence": true, "interval": true, "decay_time": false, "rise_time": false, "sharpness": true, "rise_steepness": false, "decay_steepness": false, "slope_ratio": false }, "filter_ranges_hz": [ [ 5, 80 ], [ 5, 30 ] ], "detect_troughs": { "estimate": true, "distance_troughs_ms": 10, "distance_peaks_ms": 5 }, "detect_peaks": { "estimate": true, "distance_troughs_ms": 5, "distance_peaks_ms": 10 }, "estimator": { "mean": [ "interval" ], "median": null, "max": [ "prominence", "sharpness" ], "min": null, "var": null }, "apply_estimator_between_peaks_and_troughs": true } Raw signals ~~~~~~~~~~~ Next, raw signals can be returned, specified by the **return_raw** method. This can be useful for using e.g. normalization, rereferencing or resampling before feeding data to a deep learning model. Characterization of spectral aperiodic component ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ There is also a wrapper around the `fooof `_ toolbox for characterization of the periodic and aperiodic components. Periodic components will be returned with a *peak_idx*\ , the respective center frequency, bandwith, and height over the aperiodic component. *fooof* specific parameters, e.g. *knee* or *max_n_peaks* are passed to the fooof object as well: .. code-block:: json "fooof": { "aperiodic": { "exponent": true, "offset": true, "knee": true }, "periodic": { "center_frequency": false, "band_width": false, "height_over_ap": false }, "windowlength_ms": 800, "peak_width_limits": [ 0.5, 12 ], "max_n_peaks": 3, "min_peak_height": 0, "peak_threshold": 2, "freq_range_hz": [ 2, 40 ], "knee": true } .. note:: When using the knee parameter, the *knee_frequency* is returned for every fit. See also the fooof `Aperiodic Component Fitting Notebook `_. Nonlinear measures for dynamical systems (nolds) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ **nolds** features are estimates as a direct wrapper around the `nolds toolbox `_. Features can be estimated from raw data directly, or data being filtered in different frequency bands. .. warning:: The computation time for this feature modality is however very high. For real time applications we tested it was not applicable. .. code-block:: json "nolds_features": { "sample_entropy": true, "correlation_dimension": true, "lyapunov_exponent": true, "hurst_exponent": true, "detrended_fluctutaion_analysis": true, "data": { "raw": true, "frequency_bands": [ "theta", "alpha", "low beta", "high beta", "low gamma", "high gamma", "HFA" ] } } Coherence ~~~~~~~~~ **coherence** can be calculated for channel pairs that are passed as a list of lists. Each list contains the channels specified in *channels*. The mean and/or maximum in a specific frequency band can be calculated. The maximum for all frequency bands can also be estimated. .. code-block:: json "coherence": { "channels": [ [ "STN_RIGHT_0", "ECOG_RIGHT_0" ] ], "frequency_bands": [ "high beta" ], "features": { "mean_fband": true, "max_fband": true, "max_allfbands": true }, "method": { "coh": true, "icoh": true } } Bursts ~~~~~~ **bursting** features were previously often investigated in invasive electrophysiology. Here burst features for different frequency bands with specified *time_duration_s* and *threshold* can be estimated: .. code-block:: json "burst_settings": { "threshold": 75, "time_duration_s": 30, "frequency_bands": [ "low beta", "high beta", "low gamma" ], "burst_features": { "duration": true, "amplitude": true, "burst_rate_per_s": true, "in_burst": true } } MNE-connectivity ~~~~~~~~~~~~~~~~ **MNE-connectivity** is a direct wrapper around the mne_connectivity `spectral_connectivity_epochs `_ function. .. code-block:: json "mne_connectiviy": { "method": "plv", "mode": "multitaper" } Line length ~~~~~~~~~~~ **linelength** is a very simple features that calculates in the specified batch the sum of the absolute signal of a channel *x*: .. math:: LineLength(x) = \sum_{i=0}^{Batch\ Length} |x_i| Postprocessing ^^^^^^^^^^^^^^ Projection ~~~~~~~~~~ **projection_cortex** and **projection_subcortex** allow for feature projection of individual channels to a common subcortical or cortical grid, defined by the *grid_cortex.tsv* and *subgrid_cortex.tsv* files. Example *.tsv* files can be found in the shipped py_neuromodulation package. For both projections a *max_dist_mm* parameter needs to be specified, in which data is linearly interpolated, weighted by their inverse grid point distance. For further motivation see the example notebook :doc:`auto_examples/plot_4_example_gridPointProjection`. .. code-block:: json "project_cortex_settings": { "max_dist_mm": 20 }, "project_subcortex_settings": { "max_dist_mm": 5 }